HomeMy WebLinkAboutPermit File BLD-2020-0655 4410 San Juan Avenue (5)DocuSign Envelope ID B72D5C9D-5CE4-4060-AF26-52BDB2601 EOD
Y o� PLANNING, COMMUNITY, & ECONOMIC DEVELOPMENT DEPARTMENT
Mailing Address: P.O. Box 547, Anacortes, WA 98221
x 7 h Office Location: 904 61 Street, Anacortes WA 98821
'q Phone: (360) 293-1901
O•ARCHITECTURAL
1. PROPERTY WHERE WORK IS OCCURRING
ADDRESS:
4410 San Juan Ave, Anacortes WA 98221
PARCEL
P81763
NUMBER(S)
2. GENERAL INFORMATION
This form is intended to assist applicants in creating complete, code compliant architectural plans. Please
check the plans you wish to submit to make sure they contain each of the listed items. To the right of the
Requirements column is space for you to list the sheet number of the plan set where the listed
information is shown.
• Minimum Plan Size:11" x 17" and drawn in an architectural scale.
• Architectural plans for structures 4,000 square feet or larger are required to be prepared and
stamped by an architect licensed in the State of Washington.
• Structural plans must be stamped by a structural engineer licensed in the state of Washington.
3. REQUIREMENTS FOR ALL ARCHITECTURAL PLANS
COMPLETE REQUIREMENTS PAGE # ON
? YOUR PLANS
Cover (or is` page) must include:
• Site address
• Parcel number
/
• Lot number (if applicable)
•/
• Lot size
+ Lot coverage
• % impervious surface coverage
Floor plans with existing (if applicable) and proposed building layout with square
footages
NA
and with the use of each room/area labeled.
Window and door sizes labeled and window ventilation area. Commercial,
Nq
!T
Multi -Family, and Mixed -Use Structures must also include door and window
NA
schedules.
NA
Plumbing, duct, and electrical layout. Penetration protection must be shown.
Z
Opening headers, size, and material.
Cross section details, showing typical foundation, floor, wall, ceiling and roof
construction and insulation.
✓
Structural members labeled as to size and spacing as well as bracing, blocking,
bridging, special connectors, and anchor bolts.
Details documenting energy code compliance.
(Q 7
Exterior building elevations demonstrating compliance with applicable structure
NA
type design standards (small lot, duplex, or ADU) and maximum building height
NA
Res. Building Permit Application Submittal Checklist
Updated October 10, 2019
Page 10 of 18
DocuSign Envelope ID: B72D5C9D-5CE4-4060-AF26-52BDB2601EOD
♦� Y o
PLANNING, COMMUNITY, & ECONOMIC DEVELOPMENT DEPARTMENT
Mailing Address: P.O. Box 547, Anacortes, WA 98221
Office Location: 904 6th Street, Anacortes WA 98821
�
Rcog _
360 Phone: 293-1901
( �
Building height (see AMC 19.42.120 for measurement methods, exceptions and modifications).
• Label the building height at the highest point of the structure from the average
of the natural topography at the foundation at the front of the building.
• Label the average elevation of the natural topography at the front of the
building.
Nk
n`
• Label the elevation at the center of all exterior walls of the proposed building.
1 `�
• For ADUs only, include elevations demonstrating compliance with the
height/setback plane (see AMC 19.47.030(C)(6)).
NA
Special details as needed (i.e., stairs, fireplaces, special construction).
NA
Insulation and insulation values of walls, slab, floors, and roof/ceiling.
j4
N
Existing and proposed grades with slope of lot shown.
NA -
Res. Building Permit Application Submittal Checklist
Updated October 10, 2019
Page 11 of 18