Loading...
HomeMy WebLinkAboutPermit File BLD-2022-0626 2006 Creekside Circle 1 Q City of Anacortes Invoice/Permit#: BLD-2022-0626 904 6th'M Street Applied date: 08/05/2022 w.. _ P.O.Box 547 Issue date: 08/05/2022 "' '07 Anacortes, WA 98221-0547 Expire date: 02/01/2024 (360) 293-1901 Job Address: 2006 CREEKSIDE CIR Permit Type: Mechanical Permit ANACORTES WA 98221-2460 Project: APN: P84003 Remarks: Replace heating system with a heat pump due to fire, and replace all duct workeffected by fire in crawl space. Owner: ROBERT& RITA MCELROY-YRIBAR Contractor: HEATING AND COOLING NW LLC Address: 2006 CREEKSIDE CIR Address: 2207 LUNDQUIST LN ANACORTES WA 98221-2460 LAKE STEVENS WA 98258 Phone: (360)395-5674 Phone: (425)367-3444 License#: General Information: Fees: #of Heat Pumps —3 Hp 1 Mechanical Permit Fees 48.85 #OF AIR HANDLING UNITS <10000 1 Total Calculated: 48.85 Deposits/Receipts: 0.00 Total Due: 48.85 The issuance or granting of this permit shall not be construed to be a permit for, or approval of, any violation of this Code or any other ordinance or order of the City, of any state or federal law, or of any order, proclamation, guidance advice or decision of the Governor of this State. To the extent the issuance or granting of this permit is interpreted to allow construction activity during any period of time when such construction is prohibited or restricted by any state or federal law, or order, proclamation, guidance advice or decision of the Governor of this State, this permit shall not authorize such work and shall not be valid. The building official is authorized to prevent occupancy or use of a structure where in violation of this Code, any other City ordinances of this jurisdiction or any other ordinance or executive order of the City, or of any state or federal law,or of any order, proclamation, guidance advice or decision of the Governor. The building official is authorized to suspend or revoke this permit if it is determined to be issued in error or on the basis of incorrect, inaccurate or incomplete information, or in violation of any City ordinance, regulation or order, state or federal law, or any order, proclamation, guidance or decision of the Governor.This permit becomes null and void if work or construction authorized is not commenced within 180 days or if construction work is suspended or abandoned for a period of 180 days at any time after work is commenced. I hav;read and fined th application and know the same to be true and correct. SIGNATURE OF OWNER OR AUTHORIZED AGENT ISS Y F,'I Y PLANNING, COMMUNITY, Si ECONOMIC DEVELOPMENT DEPARTMENT Mailing Address: P.O. Box 547,Anacortes, WA 98221 Office Location: 904 6th Street, Anacortes WA 98821 + Phone: (360) 293-1901 PLUMBING & MECHANICAL PERMIT APPLICATION Please complete all applicable information and submit to buildinep ymit cityofanacortes ore PROPERTY INFORMATION PROJECT ADDRESS ASSESSORS PARCEL NUMBER 2006 Creekside circle PROJECT VALUATION 13900 Z RESIDENTIAL COMMERCIAL PROPERTY OWNER OWNER PHONE Bob Mclroy 3603955674 OWNER ADDRESS OWNER EMAIL 2006 Creekside circle ritabob1994@gmail.com APPLICANT INFORMATION [--]PROPERTY OWNERZCONT ACTOR OTHER: NAME PHONE Chris Meador 4253673444 ADDRESS EMAIL 2207 LUndquist Laner chris@heatingandcoolingnw.com CONTRACTOR INFORMATION NAME PHONE Chris Meador 4253673444 CONTRACTOR'S BUSINESS LICENSES* STATE LICENSE# EXPIRATION *All Contractors & Subcontractors must have a valid W e-4►Jr- A 1 . 3�- z3 City of Anacortes business license prior to doing work UBI LICENSE# EXPIRATION in the City. koI 4 1 ,L3 ADDRESS(STREET,CITY,STATE,ZIP) EMAIL 0-7 L. A4 t,�1~ 1,Ai PROJECT INFORMATION I W DESCRIPTION OF PROPOSED WORK: replace existing heating system with heat pump due to fire, replace all duct effected duct work in crawl space. IS THIS WORK ASSOCIATED WITH ANOTHER PRO ECT? YES �10 If YES,provide the permit/application number: vO ✓.nj Plumbing/Mechanical Permit Application Updated December 2021 Page 1 of 3 MECHANICAL APPLIANCE/EQUIPMENT INFORMATION(NEW AND RELOCATED) EQUIPMENT TYPE Indicate the number of fixtures for each equipment type TOTAL GAS ELECTRIC OTHER-Please specify COMMENT Furnace Wall Heater Water Heater Heat Pump Air Conditioner/Handier 1 Radiant/Hydronic Heating Exhaust Fans Range Hood Fireplace Clothes Dryer&Duct Stove/Range/Oven Refrigeration Unit Gas Piping/Outlet(s) Boiler BTUs: Other TOTAL MECHANICAL OUTLETS PLUMBING FIXTURES FIXTURE TYPE(NEW AND RELOCATED) TOTAL FIXTURE TYPE(NEW AND RELOCATED) TOTAL Toilets Refrigerator water supply Kitchen Sink Pressure Reduction Valve/Regulator Utility Sink Water Service Line Tub Water Piping Hand Sink Washing Machine Shower Electric Water Heater:Tank-less? Yes❑ No Dishwasher Backflow Prevention Device Urinal Hose Bib Floor Drain/Floor Sink Drinking Fountain Hydronic Heat in:QFloor ❑Wall Grease Interceptor Other-please specify: TOTAL PLUMBING FIXTURES Plumbing/Mechanical Permit Application Updated December 2021 Page 2 of 3 PLUMBING & MECHANICAL PERMIT APPLICATION CHECKLIST COMMERCIAL RESIDENTIAL 0 SUBMITTAL REQUIREME TS = C = c o 3; Az Z W m n' rD- G� m Plumbing&Mechanical Permit Application ✓ ✓ ✓ Mechanical Plans Structural Calculations ✓ State Non-Residential Energy Code Compliance Form ✓ Manufacturer's Specifications/Cut Sheets ✓ ✓ ✓ Plumbing Plans Listed&Tested Fire Stopping Assemblies ✓ Elevation View for Roof Mounted Equipment ✓ ✓ Existing Floor Plan Ve New Floor Plan NOTE: 1. Handouts and standard details maybe found on the City's Planning, Community, & Economic Development website or can be obtained at c ty hall during normal business hours. 2. Plans, calculation, &reports prepared by scat licensed architects or professional engineers must be stamped and signed by the design professional. 3. If installing a backflow prevention device, it will need to pass test results of which will need to be submitted to the city for review. ACKNOWLEDGEMENTS & SIGNATURE By affixing my signature hereto,I certify that I am t e owner,or am acting as the Owner's authorized agent, and that the application and documents contained with this submittal are complete and accurate to the best of my knowledge and abilities ��t,0A___ . r' 2 SIGNATURE DATE Plumbing/Mechanical Permit Application Updated December 2021 Page 3 of 3 2018 Washington State Energy Code—Residential Prescriptive Energy Code Compliance for All Climate Zones in Washington Sin le Famil —New& Additions effective February 1,2021 Version 1.1 These requirements apply to all IRC building types,including detached one- and two-family dwellings and multiple single-family dwellings(townhouses). project Information — Contact Information l i Belfor Mc roy Chris Meador 425-367-3444 chris@heatingandcoolingnw.com instructions:This single-family project will use the requirements of the Prescriptive Path below and incorporate the minimum values listed. Based on the size of the structure,the appropriate number of additional credits are checked as chosen by the permit applicant. Provide all information from the following tables as building permit drawings:Table R402.1-insulation and Fenestration Requirements by Component,Table R 06.2-Fuel Normalization Credits and 406.3-Energy Credits. LAuthorized representative Date ._ -- -- -- - _ -- ---- -- All Climate Zones Table � R402.1.1 aloe -- U-Factor a Fenestration U-Factor b /a i 0.30 Skylight U-Factor" /a _Glazed Fenestration SHGC bje — /a j n/a Ceiling e 9 0.026 --j Wood Frame Wall B" 2 int — - -- 0.056- Floor 0 0.OZ9 Below Grade Watl`" 10/15/ lint TB 1 0.042 Slab a=f R-Value&depth 1 , 2 ft f n/a — I R-values are minimums. U-factors and SHGC are maximums.When insulation is installed in a cavity that is less a than the label or design thickness of the insulation,the compressed R-value of the insulation from Appendix I Table A101.4 shall not be less than the R-value specified in the table. j b The fenestration U-factor column excludes skylights. "10 15 21+5TB"means R-10 continuous insulatic n on the exterior of the wall,or R-15 continuous insulation on the interior of the wall,or R-21 cavity insulation plus a thermal break between the slab and the basement wall at c the interior of the basement wall."10/15/21+STEP shall be permitted to be met with R-13 cavity insulation on the interior of the basement wall plus R-5 continu us insulation on the interior or exterior of the wall. "5T13" means R-5 thermal break between floor slab and asement wall i R-10 continuous insulation is required under heated slab on grade floors.See Section R402.2.9.1. e For single rafter-or joist-vaulted ceilings,the insulation may be reduced to R-38 if the full insulation depth extends over the top plate of the exterior wall. _ R-7.5 continuous insulation installed over an exist ng slab is deemed to be equivalent to the required perimeter ~: f slab insulation when applied to existing slabs com lying with Section R503.1.1.If foam plastic is used,it shall meet the requirements for thermal barriers prote ting foam plastics. For log structures developed in compliance with S'andard ICC 400,log walls shall meet the requirements for g climate zone 6 of ICC 400. Int.(intermediate framing)denotes framing and insulation as described in Section A103.2.2 including standard h framing 16 inches on center,78%of the wall cavity insulated and headers insulated with a minimum of R-10 insulation. Prescriptive Path—Single Family 2018 Washinc ton State Energy Code-R 1 I i 2018 Washington Stote Energy Code-Residential Prescriptive Energy Code Comp liance for All Climate Zones in Washington Single Family-New&Additions(effective February 1, 2021) Each dwelling unit in a residential building shall comply with sufficient options from Table R406.2 (fuel normalization credits)and Table 406.3(energy credits)to achieve the following minimum number of credits.To claim this credit,the building permit drawings shall specify the option selected and the maximum tested building air leakage,and show the qualifying ventilation system and its control sequence of operation. 1. Small Dwelling Unit:3 credits Dwelling units less than 1,500 sf in conditioned floor area with less than 300 sf of fenestration area. Additions to existing building that are greater than 500 sf of heated floor area but less than 1,500 sf. 2. Medium Dwelling Unit:6 credits All dwelling units that are not included in#1 or#3 3. Large Dwelling Unit:7 credits Dwelling units exceeding 5,000 sf of conditioned floor area 4. Additions less than 500 square feet:1.5 credits All other additions shall meet 1-3 above Before selecting your credits on this Summary table,r View the details in Table 406.3(Single Family),on page 4. ---� Summa' of Table R406.2 and 406.3 Heating Credits select ONE 1 Fuel Normalization Descriptions User Notes Options � heating option 1 Combustion heating minimum NAECAb _ 0.0 �2 Heat pump` _ 1.0 ❑ Mitsubishi SVZKP30NA 3 Electric resistance heat only-furnace or zonal -1.0 ❑ 4_j DHP with zonal electric resistance per option 3.4 0.5 1771 5 All other heating systems 10 ❑ 1, Energy __F__ Credits-select ONE Options � p p � gycate, oryd Energy Credit Option Descri tions energy option from each 1.1 Efficient Building Envelope 0.5 ❑ --- 1.2 Efficient Building Envelope 1.0 (� 1.3 Efficient Building Envelope 0.5 ❑ 1.4 Efficient Building Envelope 1.0 ❑ - --� 1.5 Efficient Building Envelope 2.0 ❑ 1.6 Efficient Building Envelope 3.0 ❑ 1.7 i Efficient Building Envelope - - 0.5 -- 2.1 Air Leakage Control and Efficient Ventilation 0.5 2.2 Air Leakage Control and Efficient Ventilation 1.0 ❑ 2.3 Air Leakage Control and Efficient Ventilation 1,5 ❑ 2.4 Air Leakage Control and Efficient Ventilation 2.0 ❑ t 3.1- High Efficiency HVAC 1.0 3.2 High Efficiency HVAC 1.0 ❑ -.._ ---- - j 3.31 High Efficiency HVAC 1.5 ❑ 3.4 High Efficiency HVAC 1.5 ❑ �- 3.5 High Efficiency HVAC _ 1.5 ❑ 3.6a Nigh Efficiency HVAC _ _2.0 Cj SUZKA30NAHZ 4.1 High Efficiency HVAC Distribution System 0.5 ❑ 4.2 High Efficiency HVAC Distribution System 1,0 ❑ Prescriptive Path-Single Family 2018 Washinc ton State Energy Code-R 2 2018 Washington State Energy Code—Residential Prescriptive Energy Code Compliance for All Climate Zones in Washington Single Family—New& Additions(effective February 1,2021) Summary of Table R406.2(cont.) Energy Credits-select ONE Options Energy Credit Option Descriptions(cont.) energy option from User Notes each category 5.1d Efficient Water Heating 0.5 ❑ __ _____.--_- � 5.2 I Efficient Water Heating 0.5 I ❑ 5.3 - _ - Efficient Water Heating 1.0 ❑ 5.4 Efficient Water Heating 1.5El 5.5 Efficient Water Heating �2.0 ❑ 5.6 Efficient Water Heating 2,5 ❑ 6.1e Renewable Electric Energy(3 credits max) 1.0 — -- — — 7.1 [Appliance Package 0.5 ❑ - TOtpl fedlt5 Calculate Total Ctear Form a. An alternative heating source sized at a maximum of 0.5 W/sf(equivalent)of heated floor area or 500 W, whichever is bigger,may be installed in the dwellhig unit. b. Equipment listed in Table C403.3.2(4)or C403.3.2(5) c. Equipment listed in Table C403.3.2(1)or C403.3.2(2) d. You cannot select more than one option from any category EXCEPT in category 5.Option 5.1 may be combined with options 5.2 through 5.6.See Table 406.3. e. 1.0 credit for each 1,200 kWh of electrical generation provided annually,up to 3 credits max. See the complete Table R406.2 for all requirements and option descriptions. f. Use the single radiobutton in the upper right of the second column to deselect radiobuttons in that group. L_Fleas,e print only pages 3 through 3 of this veorksheet for submission to your Building official. For Building Officials Only I I Prescriptive Path—Single Family 2018 Washing on State Energy Code-R 3 2018 Washington State Energy Code—Residential Prescriptive Energy Code Compliance for All Climate Zones in Washington Single family—New&Additions(effective February 1,2021) Table 406.3—En argy Credits(Single Family) Option Description Credits SF 1. EFFICIENT BUILDING ENVELOPE OPTIONS Only one option from Items 1.1 through 1.7 may be selected in this category. Compliance with the conductive UA targets is demonstrated using Section R402.1.4,Total UA alternative,where [1- (Proposed UA/Target UA)]>the required%UA reduction. 1 1 Prescriptive compliance is based on Table R402.1.1 with the following modifications: Vertical fenestration U=0.24 O.S 1.2 Prescriptive compliance is based on Table R402.1.1 with the following modifications: Vertical fenestration U=0.20 1.0 Prescriptive compliance is based on Table R402.1.1 withthe following modifications. Vertical fenestration U=0.28 Floor R-38 1.3 Slab on grade R-10 perimeter and under entire slab below grade slab R-10 perimeter and 0.5 under entire slab or Compliance based on Section R402.1.4: Reduce the Total conductive UA by 5% Prescriptive compliance is based on Table R402.1.1 with the following modifications. Vertical fenestration U=0.25 Wall R-21 plus R-4 ci Floor R-38 1.4 Basement wall R-21 int plus R-5 ci 1.0 Slab on grade R-10 perimeter and under e itire slab Below grade slab R-10 perimeter and under entire slab or Compliance based on Section R402.1.4: Reduce the Total conductive UA by 15% Prescriptive compliance is based on Table 402.1.1 with the followin modifications: Vertical fenestration U=0.22 Ceiling and single-rafter orjoist-vaulted R- 9 advanced Wood frame wall R-21 int plus R-12 ci Floor R-38 1.5 Basement wall R-21 int plus R-12 ci 2.0 Slab on grade R-10 perimeter and under a tire slab Below grade slab R-10 perimeter and under entire slab or Compliance based on Section R402.1.4:Reduce the Total conductive UA by 30% Prescriptive compliance is based on Table R402.1.1 with the following modifications: Vertical fenestration U=0.18 Ceiling and single-rafter or joist-vaulted R-130 advanced Wood frame wall R-21 int plus R-16 ci 1.6 Floor R-48 Basement wall R-21 int plus R-16 ci 3.0 Slab on grade R-20 perimeter and under er tire slab Below grade slab R-20 perimeter and under entire slab or Compliance based on Section R402.1.4: Re uce the Total conductive UA by 40%. Advanced framing and raised heel trusses or rafters Vertical Glazing U-0.28 1.7 R-49 Advanced(U-0.020)as listed in Section A102.2.1,Ceilings below a vented attic and 0.5 R-49 vaulted ceilings with full height of uncompressed insulation extending over the wall top plate at the eaves. Prescriptive Path—Single Family 2018 Washinc ton State Energy Code-R 4 2018 Washington State Energy Code—Residential Prescriptive Energy Code Comp Hance for All Climate Zones in Washington Single Family—New&Additions(effective February 1,2021) Table 406.3—Energy Credits(Single Family) Option escription Credits:SF 2.AIR LEAKAGE CONTROL AND EFFICIENT VENTILATI N OPTIONS Only one option from Items 2.1 through 2.4 may be selected in this category. Compliance based on R402.4.1.2: Reduce the tested air leakage to 3.0 air changes per hour maximum at 50 Pascals or For R-2 Occupancies,optional compliance based on Section R402.4.1.2:Reduce the tested air leakage to 0.3 cfm/sf maximum at 50 Pascals and All whole house ventilation requirements as determined by Section M1507.3 of the International Residential Code or Section 103.8 of the International Mechanical Code shall 2.1 be met with a high efficiency fan(s)(maxi um 0.35 watts/cfm), not interlocked with the 0.5 furnace fan (if present).Ventilation systems using a furnace including an ECM motor are allowed, provided that they are controlled to operate at low speed in ventilation only mode. To qualify to claim this credit,the building permit drawings shall specify the option being selected and the maximum tested building air leakage,and shall show the qualifying ventilation system and its control sequ end e of operation. Compliance based on Section R402.4.1.2: Reduce the tested air leakage to 2.0 air changes per hour maximum at 50 Pascals or For R-2 Occupancies,optional compliance based on Section R402.4.1.2: Reduce the tested 2.2 air leakage to 0.25 cfm/sf maximum at 50 Pascals and 1.0 All whole house ventilation requirements as determined by Section M1507.3 of the International Residential Code or Section 403.8 of the International Mechanical Code shall be met with a heat recovery ventilations stem with minimum sensible heat recovery efficiency of 0.65, 1 compliance based on Section R402.4,1.2; - -—--- Reduce the tested air leakage to 1.5 air changes per hour maximum at 50 Pascals or For R-2 Occupancies,optional compliance based on Section R402.4.1.2: Reduce the tested 2.3 air leakage to 0.25 cfm/sf maximum at 50 Pascals and 1.5 All whole house ventilation requirements 3s determined by Section M1507.3 of the International Residential Code or Section 03.8 of the International Mechanical Code shall be met with a heat recovery ventilation system with minimum sensible heat recovery efficiency of 0.75. 1 Compliance based on Section R402.4.1.2: Reduce the tested air leakage to 0.6 air changes per hour maximum at 50 Pascals or For R-2 Occupancies,optional compliance based on Section R402.4.1.2:Reduce the tested 2.4 air leakage to 0.15 cfm/sf maximum at 50 Pascals and 2.0 All whole house ventilation requirements s determined by Section M1507.3 of the International Residential Code or Section 403.8 of the International Mechanical Code shall be met with a heat recovery ventilation system with minimum sensible heat recovery efficiency of 0..80.Duct installation shall comply with Section R403.3.7.s To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall --specify the maximum tested building air leakage and shall show the heat recovery ventilation system. Prescriptive Path—Single Family 2018 Washinc ton State Energy Code-R 5 2018 Washington tote Energy Code—Residential Prescriptive Energy Code Compliance for All Climate Zones in Washington Single Family—New& Additions(effective February 1,2021) Table 406.3 En erg Credits(Single Family) Option _ Description Credits:SF -_ - 3.HIGH EFFICIENCY HVAC EQUIPMENT OPTIONS Only one option from Items 3.1 through 3.6 may be selected in this category. 3.1 z Energy Star rated (U.S. North)Gas or propane furnace with minimum AFUE of 95%or Energy Star rated(U.S. North)Gas or propane boiler with minimum AFUE of 90%.2 1.0 3.21 Air-source centrally ducted heat pump with minimum HSPF of 9.S.3 1.0_ Closed-loop ground source heat pump;with a minimum COP of 3.3 or 3.32 Open loop water source heat pump witha maximum pumping hydraulic head of 1S0 feet 1.5 and minimum COP of 3.6.3 Ductless mini-split heat pump system,zonal control: In homes where the primary space 3.4 heating system is zonal electric heating,a ductless mini-split heat pump system with a minimum HSPF of 10.0 shall be installed and provide heating to the largest zone of the 1.5 housing unit.4 3.5 2 Air-source,centrally ducted heat pump w th minimum HSPF of 11.0.4 1,5 Ductless split system heat pumps with no electric resistance heating in the primary living areas.A ductless heat pump system with minimum HSPF of 10 shall be sized and installed to provide heat to entire dwelling unit at the design outdoor air temperature. 3.6 z 2.0 To qualify to claim this credit,the building permit drawings shall specify the option being selected,the heated floor area calculatio ,the heating equipment type(s),the minimum equipment efficiency, and total installed eat capacity(by equipment type). Z An alternative heating source sized at a maximum of 05 W(sf(equivalent)of heated floor area or 500 W,whichever is bigger,may be installed in the dwelling unit. 3 To qualify to claim this credit,the building permit draw.ngs shall specify the option being selected and shall specify the heating equipment type and the minimum equipment efficiency. ',.4 To qualify to claim this credit,the building permit draw ngs shall specify the option being selected and shall specify the heating equipment type and the minimum equipment efficiency. 4. HIGH EFFICIENCY HVAC DISTRIBUTION SYSTEM OPTIONS All supply and return ducts located in an unconditioned attic shall be deeply buried in ceiling insulation in accordance with Secti n R403.3.7. For mechanical equipment located outside the conditioned space,a maximum of 10 linear feet of return duct and 5 linear feet of supply duct connections to the equipment may be 4.1 outside the deeply buried insulation.All rr etallic ducts located outside the conditioned space must have both transverse and longitudinal joints sealed with mastic.If flex ducts 0.5 are used,they cannot contain splices. Duct leakage shall be limited to 3 cfm per 100 square feet of conditioned floor area. Air handler(s)shall be located within the conditioned space. HVAC equipment and associated duct system(s)installation shall comply with the requirements of Section R403.3J. Locating system components in conditioned crawl spaces is not permitted under this option. 4.2 Electric resistance heat and ductless heat pumps are not permitted under this option. 1.0 Direct combustion heating equipment with AFUE less than 80%is not permitted under this option. To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall specify the heating equipment type and shall show the location of the heating and cooling equipment and all the ductwork. Prescriptive Path—Single Family 2018 Washin ton State Energy Code-R 6 2018 Washington State Energy Code—Residential Prescriptive Energy Code Compliance for All Climate Zones in Washington Single Family—New& dditions(effective February 1,2021) Table 406.3-Energy Credits(Single Family) Option Description Credits:SF 5.EFFICIENT WATER HEATING OPTIONS Only one option from Item_ s 5.2 through 5.6 may be select d in this category.Item 5.1 may be combined with any option. - - ,which captures waste water heat from all and only the showers,and has a minimum efficiency of 40%if installed for equal flow or a minimum efficiency of 54%if installed for unequal flow,Such units shall be rated in accordance with CSA B55.1 or IAPMO IGC 3 6-2017 and be so labeled. 5.1 To qualify to claim this credit,the building p rmit drawings shall include a plumbing diagram 0.5 that specifies the drain water heat recovery units and the plumbing layout needed to install it, Labels or other documentation shall be provided that demonstrates that the unit complies ,with the standard. 5.2 Water heating system shall include one oft e following: 'Energy Star rated gas or propane water heater with a minimum UEF of 0.80,s 0.5 Water eating system shall include one of the following: Energy Star rated gas or propane water healer with a minimum UEF of 0.91 or Solar water heating supplementing a minimum standard water heater.Solar water heating will provide a rated minimum savings of 85 therms or 2000 kWh based on the Solar Rating and 'Certification Corporation (SRCC)Annual Performance of OG-300 Certified Solar Water Heating 5.3 Systems or 1.0 Water heater heated by ground source heat pump meeting requirements of Option 3.3. To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall specify the water heater equipment type and the minimum equipment efficiency and,for solar water heating system5,the calculation of minimum energy savings. Water heating system shall include one oft e following. Electric heat pump water heater meeting the standards for Tier i of NEEA's advanced water heating specification or 5.4 For R-2 Occupancy,electric heat pump ware heater(s), meeting the standards for Tier I of 1.S NEEA's advanced water heating specification,shall supply domestic hot water to all units. If one water heater is serving more than one dwelling unit,all hot water supply and recirculation piping shall be insulated with R 8 minimum pipe insulation.5 Water heating system shall include one of the following:Electric heat pump water heater meeting the standards for Tier iIi of NEEA's advanced water heating specification or 5.5 'For R-2 Occupancy,electric heat pump water heater(s), meeting the standards for Tier III of 2.0 NEEA's advanced water heating specification,shall supply domestic hot water to all units. If one water heater is serving more than one d eliing unit, all hot water supply and recirculation piping shall be insulated with R 8 minimum pipe insulation.s Water heating system shall include one of th following: Electric heat pump water heater with a minimum UEF of 2.9 and utilizing a split system !configuration with the air-to-refrigerant het exchanger located outdoors. Equipment shall meet Section 4, requirements for all units, of the NEEA standard Advanced Water Heating Specification with the UEF noted above or 5.6 2.5 For R-2 Occupancy,electric heat pump watet heater(s),meeting the standards for Tier III of NEEA's advanced water heating specification and utilizing a split system configuration with the air-to-refrigerant heat exchanger located outdoors,shall supply domestic hot water to all units. If one water heater is serving more than one dwelling unit,all hot water supply and recirculation piping shall be insulated with R minimum pipe insulation.s -To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall specify the water heater equipment type and the minimum equipment efficiency. Prescriptive Path-Single Family 2018 Washin ton State Energy Code-R 7 2018 Washington Late Energy Code—Residential Prescriptive Energy Code Comp iance for All Climate Zones in Washington Single Family—New kciditions(effective February 1,2021) Table 406.3 En'rgy Credits(Single Family) - - - - -- - - Option fie:cription — T--- ---- - Credits:SF 6.RENEWABLE ELECTRIC ENERGY OPTION v For each 1200 kWh of electrical generation per housing unit provided annually by on-site wind or solar equipment a 1.0 credit shall be allowed,up to 3 credits.Generation shall be calculated as follows: For solar electric systems,the design shall be demonstrated to meet this requirement using the National Renewable Energy Laboratory calculator PVWATTs or approved alternate by the code official. 6.1 Documentation noting solar access shall be included on the plans. For wind generation projects designs shall document annual power generation based on the following factors: 1.0 the wind turbine power curve;average ar nual wind speed at the site; frequency distribution of the wind speed t the site and height of the tower. To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall show the photovoltaic or wind turbine equipment type,provide documentation of solar and wind access,and include a calculation of the minimum annual energy power production. 7.APPLIANCE PACKAGE OPTION All of the following appliances shall be ne and installed in the dwelling unit and shall meet the following standards: Dishwasher—Energy Star rated Refrigerator(if provided)—Energy Star rated Washing machine—Energy Star rated 7.1 Dryer—Energy Star rated,ventless dryer ith minimum CEF rating of 5.2 0.5 To qualify to claim this credit,the building permit drawings shall specify the option being selected and shall show the appliance type and provide documentation of Energy Star compliance.At the time of inspection,all appliances shall be installed and connected to utilities. Dryer ducts and exterior dryer vent caps are not permitted to be installed in the dwelling unit. Prescriptive Path—Single Family 2018 Washington State Energy Code-R 8 ' 1 SUZ-KA30NAHZ HANDLER30,000 BTU/H MULTI-POSITION AIR OUTDOOR30,000 BTUIH HYPER-HEATING UNIVERSAL Job Name: System Reference: Date: Indoor Unit ..SVZ-KP30NA ........................................................... Outdoor Unit SUZ-KA30NAHZ �M .niIllllIIIIIIIIIiiIIIIIIIIIIIIIe. �, ,IIlIIIIIIIIIIIIIIIIIIIII��!lIIIIIIIIIII!hl, dlllllllllll!!lIIIIIIII!IIIIIIIIIIIIIIIIII Idll6 iIIIIIliIIIIIiIlllllllllllllllllll!IIIIIIIIIIIIII' 'I!Illllllllllllllllllllluiilllll11111i1ll' �Iolll!IIIIIIIIIIIIIIIIIIIIIII!I,: d!!I!I I!!I!I!I I!!!I I I!I I!I I I I I I I I I I I I I!I I I I, IIIIIIIIIIIIIIIIIIIIIIII!lIIIIIIIIIII!IIIIIIIII�IL. �---�� �illlllllllllllll11!IIIIIII!!I!IIIIIIIIIIIII!I!I�� � ��:II!I!!IIIIII!!II!!IIIIIIIIIIIIU,111!!��' ��4�IIIIIIIInl.Illll!I'"'. I� INDOOR UNIT FEATURES • Ducted air handler provides a solution to cool and heat large zones • Highly efficient totally enclosed ECM motor • Selectable external static pressure:0.30,0.50 and 0.80 in.WG with 3 fan speeds at each static setting • 1 inch R4.2 fiberglass free insulation reduces condensation and boosts efficiency • Positive pressure cabinet with air leakage of less than 2.0%at 1.0 In.WG(Tested per ASHRAE Standard 193) • Unique blow through design allows simple coil cleaning when the blower is removed • Multi-position installation:horizontal(left or right),vertical(up or down) • Optional electric heat kit for additional heat capacity • Optional humidifier control and ERV control • Built-in humidifier control,ERV control and auxiliary heat control • Optional downflow kit • Multiple control options available: o kumo cloud°smart device app for remote access o Third-party interface options o Wired or wireless controllers OUTDOOR UNIT FEATURES • The outdoor unit powers the indoor unit,and should a power outage occur,the system is automatically restarted when power returns • INVERTER-driven compressor and LEV provide high efficiency and comfort while using only the energy needed to maintain maximum performance • H2i®hyper heat performance offers 100%heating capacity at 5°F • Hot-Start Technology:no cold air rush at equipment startup or when restarting after Defrost Cycle • Quiet operation • Built-in base pan heater • Innovative Joint Lap DC Motor leads to high efficiency and reliability • Pulse Amplitude Modulation technology • Flash injection technology for rapid and efficient heating at low ambient temperatures Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. SPECIFICATIONS: • SVZ-KP30NA : SUZ-KA30NAHZ Maximum Capacity BTU/H 27,000 Rated Capacity BTU/H 27,000 Minimum Capacity BTU/H 13,400 Cooling at 95°F' Maximum Power Input W 2,100 Rated Power Input W 2,100 Moisture Removal Pints/h 4.1 Sensible Heat Factor 0.83 Power Factor % 96.0/96.0 Maximum Capacity BTU/H 34,000 Rated Capacity BTU/H 32,000 Minimum Capacity BTU/H 13,000 Heating at 47°F Maximum Power Input W 2,880 Rated Power Input W 2,400 Power Factor % 97.0/97.0 Maximum Capacity BTU/H 32,000 Heating at 17°F3 Rated Capacity BTU/H 21,400 Maximum Power Input W 3,970 Rated Power Input W 2,750 Maximum Capacity BTU/H 32,000 Heating at 5°F" Maximum Power Input W 4,140 Heating at-13°F' Maximum Capacity BTU/H 25,600 SEER 15.0 EER' 12.5 HSPF[IV] 9.0 COP at 47°F2 3.9 Efficiency COP at 17°F at Maximum Capacity' 2.0 COP at 5°F at Maximum Capacity' 1.75 COP at-13°F at Maximum Capacity' 1.7 ENERGY STAR®Certified Yes Voltage,Phase,Frequency 208/230,1,60 Guaranteed Voltage Range VAC 187-253 Voltage:Indoor-Outdoor,S1-S2 VAC 208/230 Electrical Voltage:Indoor-Outdoor,S2-S3 V DC 24 Short-circuit Current Rating[SCCR] kA 5 Recommended Fuse/Breaker Size(Oudoor) A 35 Recommended Wire Size[Indoor-Outdoor] AWG 14 MCA A 4.13 Fan Motor Full Load Amperage A 3.3 Fan Motor Output W 244 Airflow Rate at Cooling,Dry CFM 613-744-875 Airflow Rate at Heating,Dry CFM 613-744-875 Sound Pressure Level[Cooling] dB[A] 32-37-41 Sound Pressure Level[Heating] dB[A] 32-37-41 Indoor Unit External Static Pressure in.WG 0.30-0.5-0.8 Drain Pipe Size In.[mm] 3/4[19.05] Coating on Heat Exchanger — External Finish Color Hot-dip coated steel(ZAM) Unit Dimensions W x D x H:In.[mm] 21 x 21-5/8 x 43-3/4[533 x 549 x 11111 Package Dimensions W x D x H:In.[mm] 22 x 28-3/4 x 48-3/8[558 x 730 x 1,228] Unit Weight Lbs.[kg] 119[54] Package Weight Lbs.[kg] 141[64] Indoor Unit Operating Temperature Cooling Intake Air Temp[Maximum/Minimum]* °F 95 DB, 71 WB/67 DB, 57 WB Range Heating Intake Air Temp[Maximum/Minimum] °F 80 DB/70 DB NOTES: AHRI Rated Conditions 'Cooling(Indoor//Outdoor) °F 80 DB,67 WB//95 DB,75 WB (Rated data is determined at a fixed compressor speed) 2Heating at 47°F(Indoor H Outdoor) "F 70 DB,60 WB H 47 DB,43 WB 3Heating at 17°F(Indoor H Outdoor) F 70 DB,60 WB//17 DB,15 WB Conditions +Heating at 5°F(Indoor H Outdoor) °F 70 DB,60 WB//5 DB,4 WB 'Heating at-4°F(Indoor H Outdoor) °F 70 DB,60 WB//-4 DB,-5 WB 'Heating at-5°F(Indoor H Outdoor) °F 70 DB,60 WB//-5 DB,-6 WB 7Heating at-13°F(Indoor H Outdoor) °F 70 DB,60 WB//-13 DB,-14 WB *Outdoor Unit Operating Temperature Range(Cooling Air Temp(Maximum/Minimum)): Applications should be restricted to comfort cooling only;equipment cooling applications are not recommended for low ambient temperature conditions. •For P-Series only: » Wind baffles required to operate below 23°F DB in cooling mode. • Cooling-only system with wind baffle:-40°F-115°F. n Heat pump system with wind baffle:0°F-115°F. • Refer to wind baffle documentation for further information. **Outdoor Unit Operating Temperature Range(Cooling Thermal Lock-out/Re-start Temperatures;Heating Thermal Lock-out/Re-start Temperatures): •System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures. SEACOAST PROTECTION(ONLY APPLIES TO P-SERIES-BS MODELS) External Outer Panel:Phosphate coating+Acrylic-Enamel coating Fan Motor Support:Epoxy resin coating(at edge face) •Separator Assembly Valve Bed:Epoxy resin coating(at edge face) Blue Fin treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants. Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. SPECIFICATIONS: • SVZ-KP30NA : SUZ-KA30NAHZ MCA A 24.0 MOCP A 40 Fan Motor Output W 74 Airflow Rate CFM 5901680 Refrigerant Control LEV Defrost Method Reverse Cycle Sound Pressure Level,Cooling' dB(A) 52 Sound Pressure Level,Heating2 dB(A) 53 Compressor Type Scroll Outdoor Unit Compressor Model ANB33FJMMT Compressor Rated Load Amps A 18.0 Compressor Locked Rotor Amps A 27.5 Compressor Oil Type//Charge oz. FV50S//1.4,47 External Finish Color Ivory Munsell 3Y 7.8/1.1 Base Pan Heater Built-in Unit Dimensions W x D x H:In.[mm] 41-5/16 x 14-3/16 x 52-11/16[1050 x 360 x 1338] Package Dimensions W x D x H:In.[mm] 43 x 18 x 57[1110 x 480 x 1440] Unit Weight Lbs.[kg] 261[118] Package Weight Lbs.[kg] 285[129] Cooling Air Temp[Maximum/Minimum]* °F 115 DB/0 DB Outdoor Unit Operating Temperature Range Heating Air Temp[Maximum/Minimum] °F 75 DB,65 WB/-13 DB,-14 WB Heating Thermal Lock-out/Re-start Temperatures** °F -22/-13 Type R410A Charge Lbs,oz 11,7 Refrigerant Chargeless Piping Length Ft.[m] 100[30.0] Additional Refrigerant Charge Per Additional Piping Length oz./Ft.[g/m] 0.6[56] Gas Pipe Size O.D.[Flared] In.[mm] 5/8[15.88] Liquid Pipe Size O.D.[Flared] In.[mm] 3/8[9.52] Piping Maximum Piping Length Ft.[m] 245[75] Maximum Height Difference Ft.[m] 100[30] Maximum Number of Bends 15 NOTES: AHRI Rated Conditions 'Cooling(Indoor//Outdoor) °F 80 DB,67 WB//95 DB,75 WB (Rated data is determined at a fixed compressor speed) 2Heating at 47*F(Indoor//Outdoor) OF 70 DB,60 WB//47 DB,43 WB 3Heating at 17°F(Indoor//Outdoor) °F 70 DB,60 WB//17 DB,15 WB Conditions °Heating at 5°F(Indoor//Outdoor) °F 70 DB,60 WB//5 DB,4 WB sHeating at 4*F(Indoor//Outdoor) °F 70 DB,60 WB//-4 DB,-5 WB 'Heating at-5*F(Indoor//Outdoor) °F 70 DB,60 WB//-5 DB,-6 WB 7Heating at-13*F(Indoor H Outdoor) °F 70 DB,60 WB//-13 DB,-14 WB *Outdoor Unit Operating Temperature Range(Cooling Air Temp(Maximum/Minimum)): •Applications should be restricted to comfort cooling only;equipment cooling applications are not recommended for low ambient temperature conditions. •For P-Series only: » Wind baffles required to operate below 23°F DB in cooling mode. » Cooling-only system with wind baffle:-40°F-115°F. » Heat pump system with wind baffle:0°F-115*F. » Refer to wind baffle documentation for further information. **Outdoor Unit Operating Temperature Range(Cooling Thermal Lock-out/Re-start Temperatures;Heating Thermal Lock-out/Re-start Temperatures): •System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures. SEACOAST PROTECTION(ONLYAPPLIES TO P-SERIES-BS MODELS) External Outer Panel:Phosphate coating+Acrylic-Enamel coating •Fan Motor Support:Epoxy resin coating(at edge face) •Separator Assembly Valve Bed:Epoxy resin coating(at edge face) Blue Fin treatment is an anti-corrosion treatment that is applied to the condenser coil to protect it against airborne contaminants. Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. INDOOR ACCESSORIES: • ' 1 BACnet®and Modbus Interface ❑ PAC-UKPRC001-CN-1 CN24 Relay Kit CN24RELAY-KIT-CM3 Connector cable for remote display PAC-SA88HA-EP IT Extender PAC-WHS011E-E Control Interface kumo station®for kumo cloud® PAC-WHS01 HC-E Remote Operation Adapter$ PAC-SF40RM-E Thermostat Interface PAC-US444CN-1 USNAP Adapter PAC-WHS01 UP-E Wireless Interface for kumo cloud® PAC-USWHS002-WF-2 Flush Mount Temperature Sensor PAC-USSEN001-FM-1 Remote Sensor Remote Temperature Sensor surface mount PAC-SE41 TS-E Wireless temperature and humitity sensor for kumo cloud® PAC-USWHS003-TH-1 Airzone ZBS Wired Blueface Principal Controller White AZZBSBLUEFACECB Airzone ZBS Wired Lite Controller White AZZBSLITECB Airzone ZBS Wired Think Controller White AZZBSTHINKCB Wired Remote Controller Airzone ZBS Wireless Lite Controller White AZZBSLITERB Airzone ZBS Wireless Think Controller White AZZBSTHINKRB Deluxe Wired MA Remote Controllert PAR-40MAAU Simple MA Remote Controllert PAC-YT53CRAU-J Touch MA Controllert PAR-CT01 MAU-SB kumo touch"RedLINK"Wireless Controller MHK2 Wireless Remote Controller Wireless MA Receiver PAR-FA32MA-W Wireless MA Remote Controller PAR-FL32MA-E Condensate Blue Diamond Sensor Extension Cable—15 Ft. C13-103 Control Wire 20/2PR,1 PR shielded+1 PR plenum wire forAirzone,100 ft reel CW2042S2-100 20/2PR,shielded+1PR plenum wire for Airzone,500 It reel CW2042S2-500 Disconnect Switch (30A/600V/UL)[fits 2"X 4"utility box]-Black TAZ-MS303 (30A/600V/UL)[fits 2"X 4"utility box]-White TAZ-MS303W Downflow Kit Downflow Kit DFK-M Electric Heat Lockout Electric Heat Lockout ETC-211000-MIT 10kW Electric Heater EH10-SVZ-M Electric Kit Heats 5kW Electric Heater EH05-SVZ-M 8kW Electric Heater EH08-SVZ-M 10'x 318"x 10'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-10 100'x 3/8"x 100'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-100 Lineset 15'x 3/8"x 15'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-15 30'x 3/8"x 30'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-30 50'x 3/8"x 50'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-50 65'x 3/8"x 65'x 5/8"Lineset(Twin-Tube Insulation) MPLS385812T-65 Terminal Block Separate Terminal Power Block SPTB1 NOTES: tRequires MAC-334IF-E •M-Series EZ FIT®Recessed Ceiling Cassette,Floor-mount and Wall-mount Allows indoor units to connect to an MA Controller: Deluxe MA Remote Controller Simple MA Controller Touch MA Controller tPAC-SF40RM-E(Unable to use with wireless remote controller) M-Series Ceiling Cassette,Ceiling Suspended,Horizontal-ducted and Multi-position Air Handler •P-Series Ceiling Cassette,Ceiling Suspended,Horizontal-ducted and Multi-position Air Handler Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. OUTDOOR UNIT ACCESSORIES: Air Outlet Guide Air Outlet Guide(1 Piece) ❑ PAC-SH96SG-E(two pieces are required) Centralized Drain Pan Drain Pan PAC-SH97DP-E Control/Service Tool M-&P-Series Maintenance Tool Cable Set M21 EC0397 USB/UART Conversion Cable(Required for all laptop connection) M21 EC1397 Drain Socket Drain Socket PAC-SH71 DS-E Hail Guards Hail Guard HG-A2 14 Gauge,4 wire MiniSplit Cable-250 ft.roll S144-250 Mini-Split Wire 14 Gauge,4 wire MiniSplit Cable-50 ft.roll S144-50 16 Gauge,4 wire MiniSplit Cable-250 ft.roll S164-250 16 Gauge,4 wire MiniSplit Cable-50 ft.roll S164-50 Mounting Pad Condensing Unit Mounting Pad:24"x 42"x 3" ULTRILITE2 18"Dual Fan Stand QSMS1802M Stand 24"Dual Fan Stand QSMS2402M Outdoor Unit Stand—12"High QSMS1202M Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. INDOOR UNIT 1 • SVZ-KP30NA Tq� Unit:mm(in.) view Note: Electrical entrance for SVZ located on both left and right side of the cabinet. See right or Left side view for knockout a26 Knockout Hole 026 Knockout Hole locations. for electrical heat wiring for ele Burring Holes for electric heat installation 01 Refrigerant pipingg Flare connection(gas (DRefrigerant papingg flare connedion(1lquid) B(Duct) 280-3/I6) Mond"'&yaaniningj 548(21-5/8) \ 19.05(3/4)3/4"FPT (; 76(3) Air let Front Ile.B(4-5/8) 03.6115-7/8) Primarrr��tlrain pipe view (Ducal OG9.05�(3/4)3/4"FPT TO 70.713-I/8) o (Horizontal left) 43(1-3/4) 8(3/8 Primatrtvyv drain pipe 61(2-5/8l 019 05(3/4)3�4"FPT 8(3/8) 43(I-3/4l (I-3/I61 96(3-5/8) COIL Secontlery drain pipe Secondary drain pipe (Emergency draining) (Emergency drelning) 19.05(3/4)3/4"FPT 65.4 (Horizontal Right) e26 Knockout Hole 019.05(3/4)3l4"FPT (Indoor/Outdoor unit e26 Knockout Hole 55(2-3/16) D connection) Indoor/outdoor unit Prima��rNNy drain)pipe (Remote control ertransmission) (connection) BLOW 019.0 5(3/4)374"FPT (Remote controller transmission) Control box FlLT (Remove Blower Panel) Offom Left side I 4A, inlefI Right side view o � — vlew Unit:mm(in.) Bottom rModellNominal Filter Size Duct Connection 508 x 406.4 x 25.4 376 x 402(20 x 16 x 1) (14-13/16 x 15-7/8) 508 x 508 x 25.4 477 x 402 (20 x 20 x 1) 1 (18-13/16 x 15-7/8) Model A B C D E F G H J Gas Pipe Liquid pipe SVZ-KP12NA m 9.52 (3/8) o 6.35 SVZ-KP18NA 432 376 281 224 1,010.8 680 823 735.5 360 p 12 7(1/2) (1/4) (17) (14-13/16) (11-1/8) (8-7/8) (39-13/16) (26-13/16) (32-7/16) (29) (14-3/16) SVZ-KP24NA 015.88 a 9.52 SVZ-KP30NA 534 477 382.6 266.5 1,113.8 737 953.5 792 461 (5/8) (3/8) SVZ-KP36NA (21) 1(18-13/16)1 (15-1/8) 1 (10-1/2) (43-7/8) (29-1/16) (37-9/16) (31-3/16) (18-3/16) Specifications are subject to change without notice. ©2021 Mitsubishi Electric Trane HVAC US LLC.All rights reserved. OUTDOOR UNIT ■ ■ SUZ-KA30NAHZ Unit:mm<» \ w a 2 _- \ > J ' \ \/ �! | � ) g ` \� --Z—9 / __ ee_ air �C�C===L---JL---JC=== �C===r-----===�� �C===C=== C===== \-_ \ � - ; _ - \ a ! _Ez \ \ \ ? a - - s :„ ~ -E -E E \ y , E /\ ©_ /3\ \ J \ \ \ \ 1&oSatellite Boulevard Su_#e GA 30024 Toll Free:800-433-48 2 www.mehvae.com \. f -��_ mp#AspsNA&suKAsNAHZ-z 21 Aff bma Specifications are sub b change«n!notice. c2021 .»mom qer_Aa A±C All rights reserved.