Loading...
HomeMy WebLinkAboutBLD-2017-0569 - Application - RESIDENTIAL INTERIOR ONLY REMODELi p - �al )- 6�65 PLANNING, COMMUNITY, & ECONOMIC DEVELOPMENT DEPARTMENT RESIDENTIAL BUILDING PERMIT APPLIC TION Mailing Address: P.O. Box 547, Anacortes, WA 982 Office Location: 904 0 Street, Anacortes WA 98800 00 Q Phone: (360) 2934901, Fax: (360) 293-1938 L'/j1, OF PLEASE REFER TO THE RESIDENTIAL B UILDING PERMIT CHECKLIST BELOYV FOR SUBMITTAL REQ UIREMENTSI' PRO�Ci AD)LAESS � �(Stfeeite#): �2,PI,7 J� J 1v Subdivision/Lot #: Pr 'ect Valuation*$ C) Doc_. APPLICANT: L to 0, V\ nt- art e. P one: 40&K$&L 031 Fax: Address (Street, City, State, Zip): E-Mail Address: PI OPERTY OWNE L I/L GL h. v`e e -ems Phone: a. IN v ew� Fax: Address (Street, City, State, Zip): E-Mail Address: o I LA �-� +t-s g2 z 1 - CONTACT PERSON: Phone: Fax: Address (Street, City, State, Zip): &Mail Address: LENDING AGENCY: Phone: Fax: Address (Street, City, State, Zip): &Mail Address: CONTRACTOR:* Phone: Fax: D&WoiS l c OL,LG" Mom. 3Ca Za l I� 4s 3 -Z53-6 7ti . Address (Street, City, State, Zip): E-Mail Address: TM. _ Mc ry% A i 0 Professional License #: Ex . ate: *All Contractors & Subcontractors must have a valid City of Anacortes 6Z0 1 �m &36 ID 1 business license prior to doing work in the City. Contact the City's Business Llcense Exp. Date: Finance Department at (360) 299-I968. it O PROPOSED WORK: AJ ` PROPOSED NEW SQUAREFOOTAGE* Basement SQ': Finished Basement: ❑ Unfinished Basement ❑ 1st Floor SQ': Garage /Carport SQ': 2' Floor SQ': Deck/ Covered Porch/ Patio SQ': Fire Sprinkler: Yes ❑ No ❑ Lot Area SQ': Is construction associated with an accessory dwelling unit? Yes ❑ No ❑ I declare under penalty of perjury that the information I have provided on this form/application is true, correct, and complete, and that I am the property owner or duly authorized agent of the property owner to submit a permit application to the City of Anacortes. Print Name: �/` L& A hY' t I/y� L� Cwner>lAgent ❑ (specify). Signature: Date: u / .ell,2 II Page 1 of 3 Existing Impervious SQ': IMPERVIOUS SURFACE AREA. New Impervious SQ': Total Disturbed Land/Soil SQ': Total Proposed: Cut: Fill: New hard surfaces (pervious & impervious) Land converted from native vegetation to lawn or landscaping SQ': Land converted from native vegetation to pasture SQ': Equipment Type: Appliance/Equipment Information (new and relocated): Total #: Furnace: Gas #: Elec #: Other #: Gas Water Heater: #: Location(s): Heat Pump: Elec #: Other #: Air Conditioning: Elec #: Other #: Boiler: Gas #: Elec #: Other #: BTUs: Exhaust Fans: Bath #: Laundry #: Other #: Range Hood: #: Location(s): Fireplace: Gas #: Elec #: Other: #: Location(s): Clothes Dryer: /Duct: Gas #: Elec #: Other: #: Location(s): Stove/Range/Oven: Gas #: Elec #: Other: #: Location(s): Range Hood: Location(s): Gas Outlet(s): #: Location(s): Other: #: Location(s): Fixture Type (new PLUMBING and relocated): Total #: TOTAL OUTLETS: FIXTURES. Fixture Type (new and relocated): Total #: Water Closet (Toilet): Refrigerator water supply (for water/ice dispenser): Kitchen Sink: Pressure Reduction Valve/Pressure Regulator: Utility Sink: Water Service Line: Tub: Water Piping: Hand Sink: Clothes Washer: Shower: Electric Water Heater: Tank -less? Yes ❑ No ❑ Dishwasher: Backflow Prevention Device: Hose Bib: TOTAL OUTLETS: 3 TOTAL OUTLETS: Page 2 of 3 PLANNING, COMMUNITY, & ECONOMIC DEVELOPMENT DEPARTMENT RESIDENTIAL BUILDING PERMIT CHECKLIST Mailing Am ess: P.O. Box 54/, Anacortes, WA 98221 Off ce Location: 904 0 Street, Anacortes WA 98821 Phone: (360) 293-1901, Fax: (360) 2934938 Plans shall be of sufficient clarity to indicate the location, nature, and extent of the work proposed, and conform to the provisions of the adopted International Codes and City Ordinances, PERMIT TYPE: M a CDc� E 4 CDO A SUBMITTAL REQUIREMENTS: �' o o' ¢ (CD A �• The number indicates the number of copies ;CD CD "� ¢, for submittal (if applicable). I b e+ O fD Residential Building Permit Application 1 1 1 1 1 Site Plan (Drawn to Scale 2 2 0 2 2 Copy of Boundary Survey ✓ ✓ ✓ Building Plans (Drawn to Scale) 2 2 2 2 2 Reduced Site Plan (11" X 17") 2 2 0 1 1 Reduced Floor Plan (I I" X 17") 2 2 2 2 1 Structural Calculations (if applicable) 2 2 2 2 2 Energy Code Compliance (shown on plans) ✓ ✓ Complete Stormwater Plan 2 2 0 2 13 Elements SWPPP Checklist 2 2 0 2 Landscape Plan 2 2 2 Grading Plan/Cut/Fill 2 2 2 Critical Areas Report (if applicable) 1 1 1 1 Geotechnical Report (if applicable) 1 1 1 1 Plan Review Deposit (due upon submittal) ✓ 1. Handouts and Standard Details may be found on the City's website at www.cityofanacortes.org_or can be obtained at City Hall during normal business hours. 2. Plans, calculation, & reports prepared by state licensed architects or professional engineers must be stamped and signed by the design professional. 3. The Stormwater Plan &Drainage Analysis shall comply with the 2012 Department of Ecology's Stormwater Management Manual for Western Washington (as amended in December 2014). For details on the Complete Stormwater plan, please see the Residential Stormwater Application Checklist, Page 3 of 3 w BASF The Chemical Company Technical Product Data SPRAYTITE° 178 Series BUILDING ENVELOPE INSULATION ICC ESR-2642 DESCRIPTION: SPRAYTITE 178 is a two -component closed -cell spray polyurethane foam system utilizing an EPA -approved, zero ozone -depleting blowing agent. It is designed for use in residential construction insulation system applications. SPRAYTITE 178 is compatible with most common construction materials, but can only be processed with ELASTOSPRAYS 8000A Isocyanate. The benefits of SPRAYTITE 178 include: • Superior insulation •Non -fibrous • Controls moisture infiltration • Structural enhancement • Controls air infiltration TYPICAL PROPERTIESI'I PROPERTY METHOD SPRAYTITE 178 Resin: Specific Gravity @ 70°F ASTM D 1638 1.175 Viscosity @ 70°F (cps) Brookfield 500 Cured Foam: Density, core (pcf @ 2" lifts) ASTM D 1622 2.0 — 2.3 Thermal Resistance (aged) k-factor (Btu in/f? hr °F) ASTM C 518 0.149 @ 1-in thick 0,145 @ 4-in thick R-value (ft hr OF/Btu in) (2) Calculated 6.7 / in @ <4-in thick 6.9 / in @ >: 44 thick Compressive Strength (psi) ASTM D 1621 26 +/- 5%A Water Vapor Transmission — ASTM E 96 1,39 Permeability (perm -inch) Water Vapor Transmission — ASTM E 96 1.39 @ 1"thickness Permeance (perms) 0,70 @ 2" thickness 0,46 @ 3" thickness 0.35 @ 4" thickness Water Absorption (vol %) ASTM D 2842 0.60 Tensile Strength (psi) ASTM D 1623 62.4 (Type C) Response to Thermal and Humid Aging (% linear change) 158°F / 97% RH / 168 hrs ASTM D 2126 4.9 Closed Cell Content (%) ASTM D 6226 98 Surface Burning Characteristics Flame Spread Index(3) ASTM E 84 < 25 Smoke Developed Index ASTM E 84 < 350 The coefficient of thermal expansion vanes between 3x10-5 and 4x1U4 1/K or 1.5x 10-5 and 2x 10-4 1/°F. The lower end of the range relates to closed -cell SPF while the higher values were reported for open -cell foams. spray° Closed -Cell Spray Polyurethane Foam Insulation Seal and Insulate with ENERGY STAR ADDITIONAL TESTING, APPROVALS &CERTIFICATIONS: • ASTM E 84 (Class 1) with Product Listing (3)(4) • ICC-ES Evaluation Report ESR-2642 • ASTM C 1029 — Type II Compliant PROPERTY METHOD SPRAYTITE 178 Air Leakage ASTM E 283 <0.005 @ 1.0 inch (Us*m2 @ 75 Pa AP) • NFPA 286 per IBC Section 80314) • Approved for Attics & Crawl Spaces Installations with and without prescriptive gnition barriers per ICC-ES AC377, Appendix A1.2.2 and Appendix X • Florida Building Code Approval FL 13001.1 — Spray Polyurethane Foam Adhesive System; Fillet Application (Outside HVHZ; - 160 psf design pressure) ➢ FL 13001.2 — Spray Polyurethane Foam Adhesive System; Full Insulating Layer Application (Outside HVHZ; - 200 psf design pressure) • California Bureau of Electronic and Appliance Repair, Home Furnishings and Thermal Insulation SPRAYTITE 178 has been tested and is considered a Very Low VOC Emitting Product per environmental chamber test following ASTM D 5116 or ASTM D 6670. ➢ Analyses based on EPA Method IP48 and ASTM D 6196 for VOC's by thermal desorption followed by gas chromatography/mass spectrometry (TD/GC/MS), and EPA IP-6A and ASTM D 5197. SPRAYTITE 178 has high microbial resistance and is suitable for use in homes, schools and commercial buildings. ➢ Complies with GREENGUARD Test Method, "Method For Measuring Microbial Resistance From Various Sources Using Static Environmental Chambers", according to ASTM D 6329-98. Odor level of spray polyurethane foam is dependent on proper application using the recommended processing parameters. Please contact your local Sales or Technical Representative for specific questions regarding SPRAYTITE 178 properties, approvals, or certifications. (2) The data chart shows the R-value of this insulation. "R" means resistance to heat flow. The higher the R-value, the greater the insulating power. Compare insulation R-values before you buy. There are other factors to consider. The amount of insulation will depend upon the climate, the type and size of your house, and the fuel use patterns and family size. If you buy too much insulation it will cost you more than what you will save on fuel. To achieve proper R- (1)These physical property values are typical for this material as applied at our development values, it is essential that this insulation be installed properly. facility under controlled conditions. SPF performance and actual physical properties will vary (3) This numerical flame spread rating does not reflect hazards presented by this or any other with differences in application (i.e. ambient conditions, process equipment and settings, material under actual fire conditions. Polyurethane foam systems should not be left exposed material throughput, etc). As a result, these published properties should be used as guidelines and must be protected by a minimum 15-minute thermal barrier or other code -compliant solely for the purpose of evaluation. Physical property specifications should be determined material as allowed by applicable building code(s) and Code Officials. Building Codes provide from actual production material. guidelines representing minimum requirements. Further information is available at The above data was collected from samples prepared using the following equipment vnv;+i.scc, +f.orp. Consult all Authorities Having Jurisdiction (AHJ) over an area for additional configuration: orspecific requirements prior to beginning any project. • Gusmer H-20/35 proportioner set at 1:1 volume ratio with 50 ft of heated delivery (4) ASTM E 84 is a test designed for sample thickness up to four (4) inches. NFPA 286 is a hose ® building code recognized alternative test conducted on large-scale assemblies to evaluate • Gusmer GX-7 spray -gun configured with a #1 mix module and #70 PCD and/or GAP foam thickness in excess of four (4) inches. spray -gun configured with a #1 mix chamber • Process temperature settings: Isocyanate 130°F; Resin 130°F, Hose 130°F (5) The Air Leakage result was below the reportable limit of measurement for the equipment. Process pressure: 1000 psig minimum while spraying BASF Corporation 1703 Crosspoint Avenue Houston, TX 77054 (800) 706-07121(763) 559-0945 (Fax) WWW.Spf.basf.com Revision Date: December 10, 2010 Page 1 of 2 �/\� Polyurethane �/ Solutions SPRAYTITE 1780 SERIES BUILDING ENVELOPE INSULATION ICC ESR-2642 GENERAL INFORMATION: SPRAYTITE 178 is a spray polyurethane foam (SPF) system intended for installation by qualified contractors trained in the processing and application of SPF systems, as well as the plural -component polyurethane dispensing equipment required to do so. Contractors and applicators must comply with all applicable and appropriate storage, handling, processing and safety guidelines. BASF technical service personnel should be consulted in all cases where application conditions are questionable. CAUTIONS AND RECOMMENDATIONS,: SPRAYTITE 178 is designed for an application rate of'/ inch minimum to 2 inches maximum per pass. Once installed and material has cooled it is possible to add additional applications in order to increase the overall installed thickness of SPF. Thicker installations are allowed based on large scale testing. Please see ESR-2642 for additional information. This application procedure is in compliance with the Spray Polyurethane Foam Alliance (SPFA). SPRAYTITE 178 is NOT designed for use as an EXTERIOR roofing system. BASF offers a separate line of products for exterior roofing applications. For more information, please contact your sales representative. Cold -storage structures such as coolers and freezers demand special design considerations with regard to thermal insulation and moisture -vapor drive. SPRAYTITE 178 should NOT be installed in these. types of constructions unless the structure was designed by a design professional for specific use as cold storage. SPRAYTITE 178 is designed for installation in most standard construction configurations using common materials such as wood and wood products, metal and concrete. SPRAYTITE 178 has performed successfully when sprayed onto wood substrates down to 30°F. For other substrates, please consult your BASF sales or technical service representative for specific recommendations. Foam plastic materials installed in walls or ceilings may present a fire hazard unless protected by an approved, fire- resistant thermal barrier with a finish rating of not less than 15 minutes as required by building codes. Rim joists/header areas, in accordance with the IRC and IBC, may not require additional protection. Foam plastic must also be protected against ignition by code prescribed or properly tested materials in attics and crawl spaces. See relevant Building Codes and www,icGsafe.org for more information. In addition to reading and understanding the MSDS, all contractors and applicators must use appropriate respiratory, skin and eye Personal Protective Equipment (PPE) when handling and processing polyurethane chemical systems. Personnel should review the following documents published by Spray Polyurethane Foam Alliance (SPFA): AX-171 Course 101-R Chapter 1: Health, Safety and Environmental Aspects of Spray Polyurethane Foam and Coverings v;o?v.spraFs"Dolyuretha�+. e.e,rc and the following document is available from the Center for the Polyurethanes Industries (CPI) Model Respiratory Protection Program for Compliance with the Occupational Safety and Health Administration's Respiratory Protection Program Standard 29 C.F.R. § 1910,134 As with all SPF systems, improper application techniques should be avoided. Examples of improper application techniques include, but are not limited to excessive thickness of SPF, off -ratio material and spraying into or under rising SPF. Potential results of improperly installed SPF include: dangerously high reaction temperatures that may result in fire and offensive odors that may or may not dissipate. Improperly installed SPF must be removed and replaced with properly installed materials. LARGE MASSES of SPF should be removed to an outside safe area, cut into smaller pieces and allowed to cool before discarding into any trash receptacle. insulation is combustible. High -intensity heat sources SPF such as welding or cutting torches must not be used in contact with or in close proximity to SPRAYTITE 178 or any polyurethane foam. SHELF LIFE AND STORAGE CONDITIONS: SPRAYTITE 178 Series has a shelf life of approximately (3) months from the date of manufacture when stored in original, unopened containers at 50-80°F. As with all industrial chemicals this material should be stored in a covered, secure location and never in direct sunlight. Storage temperatures above the recommended range will shorten shelf life. Storage temperatures above the recommended range may also result in elevated headspace pressure within packages. LIMITED WARRANTY INFORMATION —PLEASE READ CAREFULLY: The information herein is to assist customers in determining whether our products are suitable for their applications. Our products are only intended for sale to industrial and commercial customers. Customer assumes full responsibility for quality control, testing and determination of suitability of products for its intended application or use. We warrant that our products will meet our written liquid component specifications. We make no other warranty of any kind, either express or implied, by fact or law, including any warranty of merchantability or fitness for a particular purpose. Our total liability and customers' exclusive remedy for all proven claims is replacement of nonconforming product and in no event shall we be liable for any other damages. While descriptions, designs, data and information contained herein are presented in goad faith and believed to be accurate, they are provided for guidance only. Bequse many fadors may affect processing or applicationluse, BASF recommends that the reader make tests to determine the suitability of a produd for a particular purpose prior to use. No warranties of any kind, either expressed or implied, including warranties of merchantability or fitness for a par[Icular purpose, are made regarding produds described or designs, data or information set forth, or that the products, designs, data or information may be sued without infringing the intellectual property rights of others. In no case shall the descriptions, - information, data or designs provided be considered a part of BASF's terms and conditions of sale. Further the descriptions, designs, data, and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the description, designs, data or information given or results obtained, all such being given and accepted at the readers risk. Revision Date. December 10, 2010 Warning: These products can be used to prepare a variety of polyurethane products. Polyurethanes are organic materials and must be Page 2 Of 2 considered combustible. ��S� ESR-2642 R E P O R Tr'" Issued April 1, 2008 This report is subject to re-examination in one year. ICC Evaluation Service, IrIC. BusinesslRegional olfioe ■ 5360 Workman Mill Road, Whittier, California 90601 ■ (562) 699-0543 WWW.ICC-eS.org Regional OtRoe � 900 Montdair Road, Sude A, Birmingham, Alabama 35213 ■ (205) 599-9800 Regional Offioe � 4051 West Flossmoor Road, Country Club Hills, Illinois 60478 � (708) 799-2305 DIVISION: 07—THERMAL AND MOISTURE PROTECTION Section: 07210-13uilding Insulation REPORT HOLDER: BASF POLYURETHANE FOAM ENTERPRISES, LLC 1703 CROSSPOINT AVENUE HOUSTON, TEXAS 77064 (713)383=4520 www.basf-pfe.com EVALUATION SUBJECT: BASF POLYURETHANE FOAM ENTERPRISES SPRAY- APPLIEDINSULATIONS: SPRAYTITE 158, SPRAYTITE 178, SPRAYTITE 81205, SPRAYTITE 81206, COMFORT FOAM 158, COMFORT FOAM 178 AND WALLTITE 1.0 EVALUATION SCOPE Compliance with the following codes: ■ 2006 International Building Code® (IBC) ■ 2006 International Residential Code® (IRC) ■ 2006 International Energy Conservation Code® (IECC) ■ Legacy Codes (see Section 8) Properties evaluated: ■ Physical properties ■ Surtace burning characteristics ■ Water vapor transmission ■ Attic and crawl space installation ■ Fire -resistance -rated construction 2.0 USES SPRAYTITE 158, SPRAYTITE 178, SPRAYTITE 81205, SPRAYTITE 81206, COMFORT FOAM 158, COMFORT FOAM 178 and WALLTITE spray- applied insulations are used as thermal insulating material in cavities of wall, floor and ceiling assemblies, and in attic and crawl space applications as described in Section 4.4. SPRAYTITE 158, SPRAYTITE 81205 and COMFORT FOAM 158 may also be used in fire - resistance -rated construction as described in Section 4.5. 3.0 DESCRIPTION 3.1 General: SPRAYTITE 158, SPRAYTITE 178, SPRAYTITE 81205, SPRAYTITE 81206, COMFORT FOAM 158, COMFORT FOAM 178 and WALLTITE are two -component, closed -cell, semirigid foam plastic insulations. The insulation is produced in the field by combining an isocyanate component A with a resin component B, resulting in products with a density ranging from 1.75 to 2.25 pcf (28 to 36 kg/m3). SPRAYTITE 158, SPRAYTITE 178, COMFORT FOAM 158 and COMFORT FOAM 178 use the same A component, designated as FE800A. SPRAYTITE 81205, SPRAYTITE 81206 and WALLTITE all use an A component designated as ELASTOSPRAY 8000A. Each insulation uses a different proprietary blend for the B component, as defined in the quality documentation. The insulation components have a shelf life of three months when stored at temperatures between 50°F (10°C) and 80°F (27°C) before installation. 3.2 Surtace-burning Characteristics: The insulations have aflame -spread index of 25 or less and a smoke -developed index of 450 or less when tested in accordance with ASTM E 84 at a maximum thickness of 4 inches (114 mm). Thicknesses of up to 8 inches (203 mm) for wall cavities and 12 inches (305 mm) for ceiling cavities are recognized, based on testing in accordance with NFPA 286. 3.3 Thermal Transmission: SPRAYTITE 158, SPRAYTITE 81205 and COMFORT FOAM 158 have a thermal resistance (R-value) of 5.6 ft2hr°F/Btu, for a 1-inch thickness at a mean temperature of 75°F (24°C). SPRAYTITE 178, SPRAYTITE 81206, COMFORT FOAM 178 and WALLTITE have a thermal resistance (R-value) of 5.1 ft2hr°F/Btu, fora 1-inch thickness at a mean temperature of 3.4 Vapor Retarder: SPRAYTITE 158, SPRAYTITE 81205 and COMFORT FOAM 158, at a minimum thickness of 3 inches (76 mm); and SPRAYTITE 178, SPRAYTITE 81206, COMFORT FOAM 178 and WALLTITE at a minimum thickness of 2 inches (51 mm), have a permeance of 1 perm [57 x 10-" kg /(mzsPa)] or less, in accordance with ASTM E 96, and may be used where a vapor retarder is required by the applicable code. 3.5 ELASTOCOAT 1500 Ignition Barrier: ELASTOCOAT 1500 Ignition Barrier coating is supplied by BASF Polyurethane Foam Enterprises, LLC. The coating is available in both 5-and 55-gallon containers (18.9 and 208 L) and has a shelf life of six months when stored in a factory - sealed container at temperatures between 50°F (10°C) and 4.1 General: The BASF Polyurethane Foam Enterprises spray -applied insulations must be installed in accordance with the manufacturer's published installation instructions, the applicable code and this report. The manufacturer's published installation instructions must be available on the jobsite at all times during installation. ��s�. REPORTS'" are not to be constnred as representing aesthetics or any other attributes not specifrcally addressed, nor are tTsey to be constnred as an endorsementofthesubjectofthereportorarecommendationforitsuse.ThereisnowarrantybylCCEvalttationService,Inc., expressorimp7ied,astoanyftnding or other matter in this report, or as to any product covered by the report. u6i nartabtl wopam mooucr amwurroM Copyright ©2008 Page 1 of 3 Page 2 of 3 ESR-2642 4.2 Application: The insulation is spray -applied at the jobsite using a volumetric positive displacement pump as recommended in the manufacturer's published installation instructions. The insulation is applied in passes having a minimum thickness of '/Z inch and a maximum thickness of 2 inches (51 mm) per pass, and must not exceed a total thickness of 8 inches (203 mm) in wall cavities and 12 inches (305 mm) in ceiling cavities. The insulation passes must be allowed to fully expand and be cured for a minimum of 15 minutes prior to application of an additional pass. The insulation must not be used in areas that have a maximum service temperature greater than 180°F (820C). The foam plastic insulation must not be used in electrical outlet or junction boxes or in contact with rain, water, or soil. The substrate must be free of moisture, frost or ice, loose scales, rust, oil, and grease. The insulation must be protected from the weather during and after application. 4.3 Thermal Barrier: The spray -applied insulations must be separated from the interior of the building by an approved thermal barrier of 0.5- inch (12.7 mm) gypsum wallboard or an equivalent 15-minute thermal barrier complying with IBC Section 2603.4 or IRC Section R314.4, as applicable, except where installation is in an attic or crawl space as described in Section 4.4. 4.4 Attics and Crawl Spaces: 4.4.1 Application with a Prescriptive Ignition Barrier: When the spray -applied insulations are installed within attics or crawl spaces where entry is made only for service of utilities, an ignition barrier must be installed in accordancewith IBC Section 2603.4.1.E or IRC Sections R314.5.3 and R314.5.4 as applicable. The ignition barrier must be consistent with the requirements for the type of construction required by the applicable code, and must be installed in a manner so that the foam plastic insulation is not exposed. 4.4.2 Application without a Prescriptive Ignition Barrier: In attics, SPRAYTITE 178, SPRAYTITE 81206, COMFORT FOAM 178 or WALLTITE may be applied to walls and to the underside of roof sheathing or roof rafters; and in crawl spaces, to walls and to the underside of wood floors, as described in this section. The thickness of the foam plastic applied to the underside of the top of the space must not exceed 7 inches (178 mm). The thickness of the foam plastic applied to the vertical surfaces must not exceed 3 inches (76 mm). The foam plastic must be covered with ELASTOCOAT 1500 Ignition Barrier, as described in Section 3.5. Surfaces to be coated must be dry, clean, and free of dirt, loose debris and any other substances that could interfere with adhesion of the coating. ELASTOCOAT 1500 Ignition Barrier is applied with a medium -size nap roller, soft brush or conventional airless spray equipment at a minimum of 1 gallon (3.75 L) per 100 ftz, (9.29 m2), resulting in a minimum dry film thickness of 18 mils (0.46 mm). The coating must be applied when ambient and substrate temperatures are within a range of 50°F (10°C) to 90°F (32°C) and requires a 24-hour curing time. SPRAYTITE 178, SPRAYTITE 81206, COMFORT FOAM 178 or WALLTITE covered with ELASTOCOAT 1500 Ignition Barrier may be installed in accordance with this section only under the following conditions: ■ Entry to the attic or crawl space is limited to service of utilities and there are no heat -producing appliances. ■ There are no interconnected basement or serviceareas. ■ Air in the attic or crawl space is not circulated to other parts of the building. ■ Ventilation of the attic or crawl space is provided in accordance with the applicable code. 4.5 Fire Resistance: SPRAYTITE 158, SPRAYTITE 81205 or COMFORT FOAM 158 may be installed on interior load -bearing two-hour fire - resistance -rated walls, provided the system is installed in accordance with the following: 4.5A Wood Framing: Two rows on separate plates, 3 inches (76 mm) apart, of minimum 2-by-4 wood studs (No. 2 Douglas fir) spaced a maximum of 16 inches (406 mm) on center. 4.5.2 Wall Finish: Base layer Is (15.9 mm), Type X gypsum wallboard is applied horizontally and fastened to each outer side of a double row of studs with 6d by 17/e inch -long (48 mm) coated nails, spaced 2 feet (610 mm) on center. Face layer of % inch -thick (15.9 mm), Type X gypsum board is applied horizontally and fastened to each outer side of studs over the base layer with 8d by 23/8 inch -long (60 mm) coated naiIs, spaced 8 inches (203 mm) on centers. Gypsum wallboard joints must be staggered 24 inches (610 mm) between layers and on opposite sides of the wall. 4.5.3 Insulation: SPRAYTITE 158, SPRAYTITE 81205 or COMFORT FOAM 158 is applied in the stud cavities of both rows at a thickness of 3 inches (76 mm). 5.0 CONDITIONS OF USE The BASF Polyurethane Foam Enterprises spray -applied insulations described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 The spray -applied insulations and the ELASTOCOAT 1500 must be installed in accordance with the manufacturer's published installation instructions, this evaluation report and the applicable code. The instructions within this report govern if there are any conflicts between the manufacturer's published installation instructions and this report. 5.2 The spray -applied insulations must be separated from the interior of the building by an approved 15-minute thermal barrier, as described in Section 4.3, except where installation is in an attic or crawl space as described in Section 4.4. 5.3 The spray -applied insulations must not exceed the thicknesses noted in Sections 3.2 and 4.4.2. 5.4 The spray -applied insulations must be protected from the weather during and after application. 5.5 The spray -applied insulations must be applied by installers certified by BASF Polyurethane Foam Enterprises. 5.6 The spray -applied insulations may be used in any buildings under the IRC, within the parameters set forth in IRC Section R314. The spray -applied insulationswere evaluated for use in Type V-B construction under the IBC. Additionally, SPRAYTITE 158, SPRAYTITE 81205 or COMFORT FOAM 158 may be used where a two- hour fire -resistance -rated wall is required, provided the system is installed as described in Section 4.5, 5.7 When the spray -applied insulations are installed in buildings of wood construction, the installation must not be on the exterior of foundation walls or below floor slabs on the ground or in contact with the ground. The insulation must have a clearance above grade and exposed earth of 6 inches (52 mm) or greater. 5.8 Insulation installers must provide certification and labeling complying with IRC Section N1101.4 or IECC Section 102.1.1, as applicable. Page 3 of 3 ESR-2642 5.9 The polyurethane foam plastic insulation components are produced in Houston, Texas, and Minneapolis, Minnesota, under a quality control program with inspections by Underwriters Laboratories Inc. (AA-668). 6.0 EVIDENCE SUBMITTED 6.1 Data in accordance with the ICC-ES Acceptance Criteria for Spray -applied Foam Plastic Insulation (AC377), dated October 2007. 6.2 Data in accordance with ASTM E 119. 7.0 IDENTIFICATION Each container of components A and B of the polyurethane foam plastic insulation bears a label with the BASF Polyurethane Foam Enterprises, LLC, name and address, the product name, the product type (A or B component), density, the, flame- spread and smoke -developed indices, the evaluation report number (ESR-2642), the shelf life and the date of manufacture. The containers also bear the name of the inspection agency (Underwriters Laboratories Inc.). Each pail of Elastocoat 1500 Ignition Barrier coating is labeled with the BASF Polyurethane Foam Enterprises, LLC, report holder's name and the product name (Elastocoat 1500 Ignition Barrier). 8.0 LEGACY CODES 8.1 Evaluation Scope: In addition to the codes referenced in Section 1.0, the products in this report were evaluated for compliance with the requirements of the following codes: ■ BOCA® National Building Code/1999 (BNBC) ■ 1999 Standard Building Code° (SBC) ■ 1997 Uniform Building CodeTM (UBC) 8.2 Uses: See Section 2.0. 8.3 Description: 8.3.1 General: See Section 3.1. 8.3.2 Surface Burning Characteristics: 8.3.2.1 BNBC and SBC: See Section 3.2. 8.3.2.2 UBC: The insulations have aflame -spread index of less than 25 and asmoke-developed index of less than 450 when tested in accordance with UBC Standard 8-1 to a maximum thickness of 4 inches (114 mm). Thicknesses of up to 8 inches (203 mm) for wall cavities and 12 inches (305 mm) for ceiling cavities are recognized, based on testing in accordance with NFPA 286, 8.3.3 Thermal Transmission: See Section 3.3. 8.3.4 Vapor Retarder: See Section 3.4. 8.3.5 Elastocoat 1500 Ignition Barrier: See Section 3.5 8.4 Installation: 8.4.1 General: See Section 4.1, 8.4.2 Application: See Section 4.2, 8.4.3 Thermal Barrier: The spray -applied insulations must be separated from the interior of the building by an approved thermal barrier of 0.5-inch (12.7 mm) gypsum wallboard or an equivalent 15-minute thermal barrier complying with BNBC Section 1503.4, SBC Section 2603.5 or UBC Section 2603.41 as applicable, except where installation is in an attic or crawl space as described in Section 3.4. 8.4.4 Attics and Crawl Spaces: 8.4.4.1 Application with a Prescriptive Ignition Barrier: When the spray- applied insulations are installed within attics or crawl spaces where entry is made only for service of utilities, an ignition barrier must be installed in accordance with BNBC Section 2603.4.1.4, SBC Section 2603.5.1.6 or UBC Section 2602.4, as applicable. The ignition barrier must be consistent with the requirements for the type of construction required by the applicable code, and must be installed in a manner so that the foam plastic insulation is not exposed. 8.4.4.2 Application without a Prescriptive Ignition Barrier: See Section 4.4.2. 8.4.5 Fire Resistance: See Section 4.5. 8.5 Conditions of Use: The BASF Polyurethane Foam Enterprises spray -applied insulations described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 8.0 of this report, subject to the following conditions: 8.5.1 See Section 5.1. 8.5.2 The spray -applied insulations must be separated from the interior of the building by an approved 15-minute thermal barrier, as described in Section 8.4.3, except where installation is in an attic or crawl space as described in Section 8.4A, 8.5.3 See Section 5.3. 8.5.4 See Section 5.4. 8.5.5 See Section 5.5. 8.5.6 The spray -applied insulations were evaluated for use in Type 5-B construction under the BNBC, Type VI under the SBC and Type WN under the UBC. Additionally, SPRAYTITE 158, SPRAYTITE 81205 or COMFORT FOAM 158 may be used where a two-hour fire -resistance -rated wall is required, provided the system is installed as described in Section 8.4.5. 8.5.7 In jurisdictions that have adopted the SBC, and when the spray -applied insulations are installed in buildings of wood construction, the installation must not be on the exterior of foundation walls or below floor slabs on the ground or in contact with the ground. The insulation must have a clearance above grade and exposed earth of 6 inches (52 mm) or greater. 8.5.8 See Section 5.9. 8.6 Evidence Submitted: See Section 6.0. 8.7 Identification: See Section 7.0.